Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Storm responseSewage cleanup
Before
After
Before
After
Before
AfterTrusted Fire & Smoke Damage Restoration for Flushing Homeowners
A kitchen fire, an electrical short in the walls, a furnace that backfired soot through the vents. In Flushing, where homes range from 1920s colonials off Northern Boulevard to mid-century brick co-ops near Kissena Park, Fire & Smoke Damage Restoration - Flushing follows a pattern we’ve seen for over 42 years: what the flames touch matters less than what the smoke finds. Soot pushes into closets, ductwork, the space behind cabinets. Within 72 hours, the acidic residue begins etching metal fixtures and yellowing every painted surface it settled on.
Floodline Restoration Co. handles the full cycle: board-up, soot removal, odor elimination, contents cleaning, and structural repair. We’re led by Curt Bowman, we answer the phone with a live dispatcher at any hour, and our crews run Dri-Eaz and XPOWER equipment that gets extraction and air scrubbing moving the same visit. If you’re dealing with fire or smoke damage in Flushing right now, call (518) 872-6111. We’ll be there when we say.
Key Takeaways
- Smoke damage worsens by the hour. Soot is acidic. It etches glass, corrodes metal, and permanently stains painted surfaces within about 72 hours.
- We handle everything from board-up to rebuild. No mid-job handoff to another company. The crew that starts the job finishes it.
- Direct insurance billing. We document everything with photos, coordinate with your adjuster, and bill the carrier directly. You never play messenger.
- Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right. No arguing, no paperwork battles.
- Live dispatch, 24/7. A real person answers at 2 a.m. in Flushing, not a recording.
What Our Fire & Smoke Damage Restoration Service Includes
Best Fire & Smoke Damage Restoration in Flushing, NY is never just one task. A fire in a single room spreads smoke through the whole floor, and often through the whole house. Our crews address every phase, in the right order, so you’re not paying twice for the same square footage.
Fire Damage Cleanup
This is the first pass after the flames are out: removing charred materials, water from firefighting efforts, and debris that would otherwise keep off-gassing into the home. In Flushing homes with plaster walls over wood lath, we’re careful to assess whether the plaster can be saved or must come down to the studs. Floodline Restoration Co. sends a certified crew with the right containment setup on the first visit, so the damage stops spreading the day we arrive.
Smoke & Soot Removal
Soot is not just dirt. It’s microscopic carbon particles coated in the chemicals that burned, including plastics, synthetics, and oils. Dry sponges lift it from most surfaces, but porous materials like drywall and unfinished wood often need deeper cleaning or sealing. We clean every surface methodically, because soot left behind under a fresh coat of primer will bleed through within a year.
Odor Removal & Deodorization
Smoke odor lives in the air, but more stubbornly in the materials that absorbed it: insulation, carpet padding, upholstery, and the inside of ductwork. We don’t mask it with fragrance. We use hydroxyl generators and thermal fogging, paired with air scrubbers, to neutralize smoke molecules at the source. Our crews have handled Flushing rowhouses where the fire was contained to one kitchen but the odor had traveled through shared wall cavities into three neighboring rooms.
Contents Cleaning & Pack-Out
Smoke doesn’t just damage the building. It coats dishes, clothing, books, furniture, and keepsakes. We’ll inventory, pack, and transport salvageable contents to our cleaning facility, where each item gets treated according to its material. What’s beyond saving, we document with photos so your insurance claim reflects the actual loss. What can be saved, we return clean and odor-free, with a written inventory.
Emergency Board-Up & Tarping
After a fire, every window, door, and roof opening is an invitation: weather, vandals, and animals don’t wait for your adjuster. We board up and tarp within hours of your call, using plywood cut to fit the opening and fastened securely. This isn’t a temporary afterthought. A proper board-up protects the property while the claim moves forward and keeps the site safe for neighbors and first responders.
Structural Fire Repair
Once cleanup is complete, the rebuild begins. This means framing, drywall, insulation, flooring, trim, and paint, all to code and all done by the same uniformed Floodline Restoration Co. crew that handled the mitigation. There’s no handoff. The moisture map from day one informs how we rebuild, so hidden pockets of water or smoke-damaged framing don’t get sealed inside the walls. A written scope is agreed before work starts, and the finished job is covered by the 90-Day Done Right Promise.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Fire & Smoke Damage Restoration
Most Flushing homeowners don’t know what brand of furnace, water heater, or air handler sits in the basement until it fails during a fire. We service every major make and model. Our technicians train to IICRC standards, which means they understand how fire and smoke behave across different mechanical systems, not just how to clean the room where the fire happened.
On jobs involving HVAC systems coated in soot, we run XPOWER air scrubbers and negative air machines to clean the air while we work, and we inspect ductwork for smoke residue that would otherwise recirculate for months. If your system needs parts, we source OEM components. Whether your home in Flushing has a high-efficiency gas furnace, a vintage boiler, or an electric heat pump, we can get the smoke out and the system running safely again.
Signs You Need Fire & Smoke Damage Restoration Right Now
- Visible soot on walls or ceilings after a fire. Soot is acidic and begins etching surfaces within days. Even a small kitchen fire can deposit enough soot to permanently stain paint and corrode metal fixtures. The sooner it’s removed, the more surfaces we can save.
- Smoke odor that lingers more than a few days. If you still smell smoke after airing out the house, it’s absorbed into porous materials: drywall, insulation, fabrics, and ductwork. Odor neutralization works best before the particles settle deep into those materials, which is why we recommend calling within the first week.
- Yellowing or discoloration on walls, ceilings, or appliances. This is a telltale sign of smoke residue that’s been left to sit. The stain often appears days or weeks after the fire as the residue reacts with moisture in the air. It’s a warning that deeper contamination is present.
- Water damage from firefighting efforts. Water used to extinguish the fire soaks flooring, drywall, and insulation. Trapped moisture leads to mold within 48 to 72 hours. Fire restoration in Flushing almost always involves water extraction and drying, which is why we run the full moisture-mapped drying protocol on every fire job.
- Respiratory irritation or a persistent cough at home. Fine soot particles stay airborne long after the smoke clears, and they irritate the lungs. If you or a family member notices coughing, wheezing, or sinus trouble at home after a fire, the air quality needs professional attention.
Our Fire & Smoke Damage Restoration Process - Step by Step
Here’s exactly what happens when you call Floodline Restoration Co. from Flushing. No mystery, no waiting on a call back.
- 1
Call and speak to a live dispatcher. You reach a person, not a recording. We ask about the fire’s cause, the size of the affected area, and whether the property is safe to enter. Then we schedule the soonest available window and send a confirmed crew.
- 2
Assessment and documentation. The crew arrives, walks the site, and maps every affected room. We photograph everything, including contents, before anything is moved. This photo record goes to your insurance carrier, and it captures what you had before the fire altered it.
- 3
Board-up, tarping, and containment. We secure every opening on the first visit. Then we set up containment and run air scrubbers so soot and odor don’t spread to unaffected rooms while we work.
- 4
Cleaning, content handling, and odor removal. Soot is lifted from every surface, contents are inventoried and either packed out or cleaned on site, and the air is scrubbed and deodorized. This phase includes daily moisture readings if water was used to fight the fire, logged until the dry standard is met.
- 5
Structural repair and final walkthrough. When cleanup is done, we rebuild what needs rebuilding: drywall, insulation, flooring, paint, trim. Then we walk the finished job with you, review the moisture log, and hand you the written 90-Day Done Right Promise. Done right, and backed in writing.
How Much Does Fire & Smoke Damage Restoration Cost in Flushing?
A typical fire and smoke cleanup in Flushing runs $2,800 to $9,500 depending on the size of the affected area and how far the smoke traveled. A small kitchen fire with soot cleanup and odor removal often lands between $2,800 and $4,500. A whole-floor fire that requires structural repair, contents pack-out, and full deodorization typically runs $8,000 to $20,000 or more, depending on square footage and materials.
Here are the typical line items you’ll see on an estimate:
- Emergency board-up and tarping: $350-$900
- Soot and smoke cleaning (per room): $400-$1,200
- Odor removal and deodorization (whole home): $800-$2,500
- Contents cleaning and pack-out: $500-$5,000 depending on volume
- Structural repair (drywall, framing, paint): $3,000-$12,000+
What moves the price: square footage, whether walls or ceilings need replacement, how long the smoke sat, and whether HVAC ductwork needs cleaning. You avoid overpaying by working with a company that gives a written scope before work starts, photos every step of the way, and never pushes unnecessary demolition. Our estimates are free, honest, and built for insurance claims. Call (518) 872-6111 for a square deal on fire and smoke damage restoration in Flushing.
Fire & Smoke Damage Restoration Near Flushing - Our Service Area
We run fire and smoke restoration jobs across Flushing, Bayside, College Point, East Elmhurst, Whitestone, Corona, Jackson Heights, Kew Gardens Hills, Elmhurst, Forest Hills, Fresh Meadows, and Oakland Gardens. Our dispatch board keeps response times short, typically inside 90 minutes for emergency board-up in central Flushing and under two hours in the surrounding neighborhoods. You can learn more about our work in neighboring areas on our Fire & Smoke Damage Restoration in Bayside page.
Serving Flushing, NY - Our Local Coverage Area
We’re based in the Flushing area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Fire & Smoke Damage Restoration in Flushing
Fire and smoke damage restoration is the process of cleaning, deodorizing, and repairing a home after a fire so it can be safely lived in again. It includes soot removal from every surface, odor neutralization in the air and materials, water extraction from firefighting efforts, contents cleaning, and rebuilding what the fire destroyed. In Flushing, the work often includes board-up and tarping on the first visit, then full structural repair once the site is clean and dry. A complete restoration job ends with the home looking, smelling, and functioning the way it did before the fire.
Emergency board-up, tarping, and initial soot cleanup happen within the first 24 to 48 hours. A full restoration, including structural repair, typically takes two to six weeks depending on the size of the fire and how far the smoke traveled through the home. Large fires that require extensive rebuild work or contents pack-out can take longer, and your insurance claim timeline can add days or weeks. We provide a written timeline after the initial assessment so you always know what to expect.
Most Flushing jobs fall between $2,800 and $9,500 for cleanup and deodorization, with structural repair adding $3,000 to $12,000 or more depending on the scope. The biggest factors are square footage, how long the soot sat, and whether water from firefighting soaked into flooring and drywall. We give a free, written estimate before any work starts, and we bill your insurance carrier directly. Call (518) 872-6111 for an exact quote on your Flushing home.
Yes. Our technicians are trained to IICRC standards and work on every major furnace, boiler, and HVAC brand in Flushing homes, from high-efficiency gas units to older oil-fired systems. Soot inside an HVAC system requires special attention because it recirculates through the house every time the system runs, and we clean the ductwork and the unit itself as part of the restoration. If parts need replacing, we order OEM components so the equipment runs as designed.
Yes. We operate 24 hours a day, 7 days a week with live dispatch. When you call from Flushing at any hour, a real person answers and a crew is dispatched immediately for board-up, tarping, and containment. Emergency response is not a sales line. It’s a live dispatcher who knows what a fire scene needs in the first few hours: security, containment, and documentation for the claim.
Every job carries the 90-Day Done Right Promise in writing. If anything we did isn’t done right, we come back and make it right at no charge. No arguing, no fine print, no waiting on a decision from a call center. It’s a written guarantee from Curt Bowman, founder of Floodline Restoration Co., and it applies to cleanup, odor removal, and structural repair work in Flushing and the surrounding area.
If the fire department says the property is safe to enter, you can do a few things ahead of time: don’t wipe or wash any soot-covered surfaces, because that can press the soot deeper into the material. Don’t run your HVAC system until it’s been inspected and cleaned, because it will spread smoke particles through the whole house. Gather any photos, receipts, or inventory lists you have of damaged contents. We can take it from there, including documentation for your insurance carrier.
Schedule Your Fire & Smoke Damage Restoration Service in Flushing Today
Fire damage doesn’t wait, and neither should you. A live dispatcher answers at any hour, and a certified crew can be on the way to your Flushing home the moment you call. The estimate is free, the scope is in writing before work begins, and the finished job is backed by the 90-Day Done Right Promise. Call (518) 872-6111 now. We’ll be there when we say.
Written by Curt Bowman, Owner at Floodline Restoration Co., serving Flushing since 2010.